Connect the device to the router via an ethernet cable or wireless by using the ssid (network name) and password printed on the. To change the wireless network name (ssid) and wireless password: Enter a new ssid using up to 32 characters. This mode is suitable when you want your devices. We are using an ac5400. Log into your router. Then click wireless, and go to. The same app can detect it on my mobile. The app does detect the backhaul. To change your wifi ssid and password just follow this vid. Up to four ssids for each bss (basic service set) can be entered in the filed ssid1 ~ ssid4. Check the box behind ssid to enable the desired ssid. Set up your extender via one of the methods. So when they have a tv app or netlfix on their phone, people can stream this themselves. My thought was to create 8 seperate ssid's for each appartment to connect the. Custom the network name (ssid), enable 6ghz in band, and then complete the security / security key or click advanced settings to carry out the other configurations according to your. Otherwise, the users need to know the network. First you need to connect before you can configure your wireless network. Locate the ssid (network name) and wireless password printed on the label of the router. Select the ssid and then. Then assign vlan id for each ssid. When all finished, click save. This faq covers the troubleshooting. Create your first ssid and configure the corresponding password. It’s quite easy to configure this vlan function for different ssids. Below shows you what to do:
